Page Comparison

...

• A Name is required of all devices and must be unique to the platform. Alpha-numeric characters with spaces, - and _ are allowed. e.g. 12_Smith_st Smart-meter

• A DevEUI is required of LoRa devices and is your device ID on the LoRa network. Find yours here.

• ID Sigfox is required of Sigfox devices and is your device ID on the Sigfox network. Contact us if you don’t have this

• A Location can be set for every device by dragging the pin on the map tool or entering an address

• The Motion field sets if the device is static or in constant motion. If you select motion the location will be updated using the devices GPS coordinates.

• The Credential field is a token that is sometimes required depending on your IoT network.

• A MODBUS Unit Identifier is also sometimes required. This is a unique number between 1 and 254.

• MODBUS Master IP Address client IP address for MODBUS connection, set as 0.0.0.0 for open access.

• Application Key: Since v2.2.0, when you add a device here it is automatically added into Chirpstack
  If your device is a modbus poll device:

• Modbus Poll Slave IP The IP address to poll data from

• Modbus Poll Port The port that we will use to poll data from

• Modbus Poll Device ID The device id associated with the device you wish to poll data from

• Modbus Poll Polling Rate (seconds) The amount of seconds between each interval. The minimum is 10 seconds.

...