Devices
A place to find more info on your IQnexus device.
The serial commands below work on all IQnexus devices to control the main sleep/wake cycle, manage the on board memory, network connection and device time.
See how to connect to your device via serial.
Commands | Description |
|---|---|
mode [mode number] | sets the device to the default configuration of device specified by the mode number |
wakeup [interval] | Sets the device to wakeup at a specified interval and transmit data |
rejoin [period] | Sets the period that the device will rejoin the network, in hours. |
time hour [hour] | Set the device clock hours |
time minute [minute] | Set the device clock minutes |
time second [second] | Set the device clock seconds |
flash save config | Saves the current configuration. |
run | Closes the command line and runs the specified sleep/wake cycle. |
help | Shows the help menu detailing the available commands |
For more info Contact us!