...
Bacnet BACnet allows you to get data from your IoT devices into your existing SCADA system and this is one of the key features of the NanoBMS system. This article will explain how to set the Nano up to achieve this.
...
BACnet Network Settings
Log in as Admin,
User: Admin,Password: AdminNavigate to Project → Network from the sidebar navigation pane.First select the Network configuration for the interface connected to the BMS in the Interfaces Tab. Here you can set Generally, this is a static IP in the same network segment as the BMS.
...
3. Select the Bacnet ID, Bacnet Port,
...
Local Endpoint (the network interface connected to the BMS network) and the broadcast address.
...
4. BACnet Points Selection
Select the KPIs you would like to be exposed as BACnet points, for instance, the AQI sensor below is exposing as BACnet points Temperature 1, Humidity 1 and CO2 index.
...
Click on save to finalise.
Yabe
To test that Bacnet is functioning and set-up correctly on the Nano, we suggest using YABE.
...
Filter by label (Content by label) | ||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Page Properties | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||
|
...