Connecting the Nano

Owned by ashton (Unlicensed)
Last updated: Jun 20, 2022 by Guus van Walstijn (Unlicensed)
2 min read

The Nano comes ready with everything you need out of the box.

  • 1x Nano

  • 2x Antennas

  • 1x Power Cable

  • 1x LoRa Gateway

  1. Attach the two antennas to the Nano

  2. Plug the power cable in and press the power button on the front of the unit

  3. Connect it to your local network via the interface Ethernet port (see picture below)

 

The NANO has 3 network ports 

  • LAN - Support Port - DHCP

    • This port is intended for product support and updates, it will automatically connect to the internet and search for updates and bug fixes. Should you require technical support with your device please ensure this port is connected to a network with internet access and a DHCP server.

  • LAN - BMS Port - User Configurable

    • This port is intended for your SCADA, BMS, or target application. It can be configured to fixed IP or automatic DHCP.

  • wlp3s0b1 Wifi AP - DHCP

    • This port allows you to connect toy our NANO for viewing and administration purposes when no network has been configured.

Accessing the NANO

  1. From your PC, under available WiFi devices, look for a device named NANO-##

     

  2. Connect to the AP using the password iqnexus-nano.

  3. Open a web browser and go to the URL monitor.nano.local

  4. There are two default Login credentials available:

    User: Admin Password: Admin
    User: Operator Password: Operator

 Find more info about default user credentials here

 

Configure LAN port

  1. Login as Admin: User: Admin Password: Admin

  2. Navigate to Project → Network

  3. Select DHCP or STATIC IP

  4. If static IP selected, enter the IP for your NANO (the default netmask is 255.255.255.0).

  5. If required, configure your Bacnet ID, Bacnet Port and Broadcast address.

  6. Click Apply. 

 



 

For more info Contact us!