Versions Compared

Old Version 1

changes.mady.by.user Mahendran Muthukumar

Saved on

compared with

New Version Current

changes.mady.by.user Alvaro Jimenez

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Revision : June 2021
Maintained by : Mahendran Muthukumar
This page Illustrates the 2 ways by which the SENAQI-V1.4 and above can be activated.
The units by default comes with shipment mode, means the unit is in deep sleep and only wakes up every 10000 minutes(7 days).
Before Activating the Unit:

  1. The appropriate Gateway for the device must be up and running. Please find more Information about setting up the gateway here.

  2. The device needs to be registered to either the Nano’s NANO’s LORA Server or TTI’s IQnexus Cloud LORA server. Please find Find more Information information about adding devices to the LORA server from here.

  3. The device needs to be added to the NANO’s project or IQnexus’s project platform with proper NANO or IQnexus Cloud Project with the correct driver to read the data from the device as well as to initiate a downlink message. Please find more Information information about adding devices to the project from here.

    Activation method 1: (Default method)
    prerequisite : Any Strong Magnet
    Prerequisite : A strong magnet (Not provided)

  4. Once the above 3 steps are completed open up the project page its usually customername.iqnexus.io or NANO’s local static IP address.

  5. Open the Devices menu as shown below.

    Image RemovedImage Added

  6. Type the device name (Usually its device’s serial number), then open the device’s control as shown below.

  7. Now enter the new wake-up period in minutes and schedule queue the down link queue downlink as shown below.

  8. Now Wave wave the magnet near the device as shown in the image

  9. Now the The device should will now wake up and makes a forced rejoin to the LORA Network, after you can monitor this on the LORA server device’s page. After a successful join the device makes a regular sends an up-link and immediately after that the device receives the queued down link followed by the reception of any queued downlinks from the LORA Server (Which is usually the change of reporting timewhich in our case will update the reporting time as per image 7).

  10. The device stores the current down link received configuration and works as per thatruns accordingly.